How To Activate Acc On Vw Atlas

Volkswagen Golf Owners Manual: Operating Adaptive Cruise Command (ACC)

Fig. 169 Left-paw side of the multifunction steering wheel: buttons for operating the Adaptive Prowl Control (ACC)

First read and observe the introductory information and safety warnings

When the Adaptive Cruise Control (ACC) is switched on, the green indicator lamp in the instrument cluster lights up, and the speed retention and the status of the Adaptive Prowl Control are shown in the display .

Conditions for starting the Adaptive Prowl Control

The selector lever must exist in position D or S or exist in the Tiptronic gate. A forward gear, but non 1st gear, must be selected in the transmission gearbox.

In vehicles with a manual gearbox, the bodily speed should be minimum xxx km/h (18 mph) if no speed is stored.

Decision-making speed

When switched on, the speed tin can be stored and set. The stored speed can vary from the speed really beingness driven if the distance is beingness actively controlled.

Function	Button on the multifunction steering wheel	Activity
Switching on the ACC.	Press the button on the multifunction steering wheel.	The system is switched on. No speed has yet been stored and the speed is not nonetheless being controlled.
Switching between the ACC and the speed limiter.	Press the button on the multifunction steering cycle.	This switches between the CCS and the speed limiter .
Activating the ACC.	Printing the button on the multifunction steering cycle.	Electric current speed is stored and controlled. If ACC is already agile: Press briefly: reduce speed by 1 km/h (1 mph) and store. Printing and hold: the stored speed is reduced continuously in steps of ane km/h (1 mph) for equally long as the push button is pressed. A reduction in speed is achieved past accelerator release or automated braking.
Switching off ACC temporarily.	Press the button on the multifunction steering bicycle. OR: depress the brake pedal. OR: depress the clutch pedal for longer than xxx seconds.	Control is switched off temporarily. The speed is stored in the memory.
Resuming ACC control.	Press the button on the multifunction steering cycle.	The stored speed is reactivated and controlled. If no speed has been stored yet, the ACC records and controls the actual speed. If ACC is already agile: Press briefly: increase speed by ane km/h (ane mph) and store. Printing and agree: the stored speed is increased continuously in steps of 1 km/h (1 mph) for as long equally the button is pressed.
Accelerating (during ACC control).	Press the button on the multifunction steering wheel.	Press briefly: increment speed in increments of ten km/h (5 mph) and store. Press and concord: the stored speed volition be increased in steps of ten km/h (5 mph) for as long as the push button is pressed.
Decelerating (during ACC control).	Press the push on the multifunction steering wheel.	Press briefly: reduce speed in increments of 10 km/h (5 mph) and store. Printing and hold: the stored speed will be reduced in steps of 10 km/h (5 mph) for every bit long as the button is pressed. A reduction in speed is achieved by accelerator release or automatic braking.
Switching off the ACC.	Printing the button on the multifunction steering bicycle.	The system is switched off. The stored speed volition exist deleted.

The mph figures given in brackets in the table chronicle exclusively to instrument clusters with mile readings.

Stop-and-become traffic and the vehicle automatically pulling abroad

If the ACC gear up for start driver message is displayed in the instrument cluster and the vehicle ahead starts to motion, the vehicle will besides pull away. ACC gear up for start can exist reactivated or extended by pressing the button . It is displayed for approximately 3 seconds.

If ACC ready for beginning is no longer displayed, the vehicle volition non start automatically, e.g. with active offset/end system. If the vehicle ahead has already moved on, you lot tin pull off by pressing the button or by depressing the accelerator briefly. The ACC and so continues regulating.

Automatic pulling away is non bachelor for all vehicles and countries.

Setting the distance level

The speed-dependent distance from the vehicle in forepart can be ready to ane of 5 levels in the infotainment system .

In moisture road atmospheric condition, you should ever set a larger distance than when driving in dry road conditions.

The following distances tin exist pre-selected:

Very small

Small-scale

Medium

Large

Very large

The distance level to the vehicle ahead is gear up using the push button on the multifunction steering bicycle . The ACC brandish appears when the button is pressed . To set the distance level, printing the push button.

When the highest level is reached, the distance returns to the lowest level when the button is pressed over again.

The altitude level can also be set using the or buttons on the multifunction steering wheel immediately later on the push on the multifunction steering wheel has been pressed.

The button and the and Driver assistance office buttons in the infotainment system can be used to set up the distance level that should be selected when the ACC is switched on .

Setting the driving plan

In vehicles with Driving Manner Choice, the selected driving manner (Driving Fashion Selection) tin can affect the acceleration response .

The following driving modes can be selected:

Normal

Sport

In vehicles without Driving Mode Selection, the acceleration response tin be afflicted past the driving mode selected by pressing the button and the and Commuter assist function buttons in the infotainment arrangement .

The following weather can prevent the Adaptive Prowl Control (ACC) from reacting:

If the accelerator is depressed.

If no gear is selected.

If the ESC is taking cosmetic action.

If the commuter has not fastened seat belt.

If there is a mistake in several brake lights on the vehicle or on a trailer with an electric connection to the vehicle.

If the vehicle is reversing.

If the vehicle is travelling faster than approximately 160 km/h (100 mph).

Alert

If you exercise non maintain the minimum distance to a vehicle in front and the difference in speed between the two vehicles is and then great that the braking activity of the ACC is insufficient, you are in danger of colliding with the vehicle in front. You should reduce the vehicle speed immediately with the foot brake.

The ACC may non be able to recognise all driving situations correctly.

Leaving your foot on the accelerator will hateful that the ACC volition non brake automatically. This is because transmission dispatch overrides the organization.

Y'all should always be prepared to brake the vehicle yourself.

Observe land-specific regulations regarding the minimum distance.

The set speed volition be deleted if the ignition or the ACC is switched off.

The ACC is automatically deactivated when the traction command system (TCS) is deactivated.

In vehicles with a start/cease system, the engine is switched off automatically during the stationary phase of ACC and is then restarted for moving off.

Radar sensor

Fig. 168 In the front bumper: radar sensor Commencement read and find the introductory information and condom warnings A radar sensor is fitted to the front bumper to monitor the traffic situatio ...

Source: https://www.vwgolf.org/operating_adaptive_cruise_control_acc_-292.html